EZ Green Solutions - Solutions and Services

Rust Repair Process and Solutions
There a great number of companies that offer rust conversion and repair products. There are a few out there whose solution is similar to our Rust Attacker product. What makes our solution work better is the combination of the Salt Attacker and the Rust Attacker. Using Rust Attacker alone will work, but not as well.

At EZ Green Solutions, we care about the environment and while the acid based solutions work really well for removing and converting rust, we cannot approve of them because of the danger they pose for the user and the environment.

Step 1 - surface preparation
Preparing the surface is fast and simple. Just brush off the loose flakes (use a hammer to pound the big flakes if applicable). Once the flakes are knocked off, wash and wipe down the surface to make sure dirt and grease is removed.

Step 2 - remove salts Salt Attacker - Salt Neutralizer

Remove the hidden salts and chlorides that facilitate the corrosion and rust. Use our bio friendly salt attacker and simply spray on the area to be repaired. Salt Attacker takes about 4 minutes to dissolve the salts.

Step 3 - convert rust rust Attacker - rust converter and repair

rust Attacker - rust converter and repair

While the surface is still moist and damp from the salt attacker, either spray or brush on the Rust Attacker. Rust attacker will only affect the areas that are oxidized and rusted. It will dry clear on the other areas. Rust Attacker will penetrate 2-3 mm into the rusted surface and will turn black in 2 to 4 hours.
Rust Attacker penetrates into the affected areas and in case there are some parts that did not get enough Rust Attacker, it is best to apply a second coat once the first coat has turned black. Rust Attacker will be tacky in about 2 hours and depending on how moist the area was, will be dry in 4 or 5 hours.

Step 4 - protect the repair Super Metal Gaurd protect and preserve metal items and surfaces

Super Metal Gaurd protect and preserve metal items and surfaces

When the rust repair is dry and the Rust Attacker has turned black, you can go ahead and treat the areas with our Super Metal Guard bio friendly metal protector and corrosion inhibitor. You can either spray on or brush on a thin coat over all the metal surface - not just the affected areas. Super Metal Guard will take about 24 hours to dry.